PKG Equipment Inc. | Specializing In Process Equipment Since 1969
Call: 585-436-4650367 Paul Rd., Rochester, NY 14624
Email: info@pkgequipment.com

Surplus / used Equipment


Used Passivation / Etch System   
  • Manufactured in 2012 by PKG Equipment Inc.
  • Automatic hoist with Allen Bradley PLC controller
  • 10 stations, 27” (DOT) x 35” x 30” deep, copolymer polypropylene
  • 316 stainless steel dryer
  • Push/pull PVC ventilation system with (10) exhaust hoods, PVC scrubber, and PVC/FRP fan
  • Process control panel (separate from hoist control)
  • AC Power Requirements: 480V/3ph/60hz, (1) @ 30 amps, (1) @ 50 amps
Passivation and Etch System
Passivation and Etch System
  Passivation and Etch System
Passivation and Etch System
  Passivation and Etch System
Passivation and Etch System
         
Passivation and Etch System
Passivation and Etch System
  Passivation and Etch System
Passivation and Etch System
  Passivation and Etch System
Passivation and Etch System



Aldonex Rectifiers   
  • Water-cooled
  • 480 volts
  • 3 Phase
  • 4 - 20 ma output
  • Remotes included
  • (6) 3000 amps, 0 - 12 volts
  • (2) 5000 amps, 0 - 12 volts


      Aldonex Rectifier
Aldonex Rectifier
    Aldonex Rectifier
Aldonex Rectifier
                 
 
  Aldonex Rectifier
Aldonex Rectifier
    Aldonex Rectifier
Aldonex Rectifier
    Aldonex Rectifier
Aldonex Rectifier
                 
    Aldonex Rectifier 3000 amps
Aldonex Rectifier 3000 amps
    Aldonex Rectifier
Aldonex Rectifier
    Aldonex Rectifier 5000 amps
Aldonex Rectifier 5000 amps



Aldonex Solid State Rectifier
  • #T-424-1.5CR-CCV
  • Never used
  • DC Output: 150 amps, 0-24 volts
  • AC Input: 480 volts, 3 phase, 60 hz
  • Air cooled
  • SCR w/ independent current & voltage controls
  • Constant current/voltage
  • 5% ripple @ full output
  • Soft start is standard 
 
  • Automatic phase sequence indicator w/ voltage & phase loss cut-off
  • Main starter overloads
  • Automatic current trip
  • Thermal shut downs
  • Rustproof plastic cabinet, blue/white, approx. 18" H x 27" W x 18" D
  • Fiberglass/polyester 12" x 10" x 5.5" remote
  • Analog DC ammeter & voltmeter in remote
  • Approx shipping weight is 300 lbs
   Aldonex Solid State Rectifier
Aldonex Solid State Rectifier

Stainless Steel Baskets
  • Never used
  • (43) 9.75" OD x 6" deep
  • (7) 9.75" OD x 10" deep
  • 3/16" perforations, 3/8" staggered centers
  • Fixed or swing handles may be added for an extra charge
      Stainless Steel Baskets
Stainless Steel Baskets
 


Hardwood Polypropylene Plating Barrel
  •  Never used
  • 18" Ø x 36"
  • 1/16" perforations
  • (2) covers
       Hardwood Polypropylene Plating Barrel
Hardwood Polypropylene Plating Barrel


Aldonex SCR Controlled Rectifier
  • Model #T-2100-.3BRF-CCV
  • Slightly used
  • DC Output: 0 - 100 volts, 30 amps
  • AC Input: 240/3/60
  • Air cooled
  • Soft start 
 
  • Digital ammeter
  • Digital voltmeter
  • Filter choke, 5% or less throughout the range
  • 18" H x 27" W x 18" D cabinet
  • 5.5" H x 12" W x 10" D remote 
   Aldonex SCR Controlled Rectifier
Aldonex SCR Controlled Rectifier


(2) Process Technology Metal Over the Side Heaters
  • Model #F2217-PI
  • 304 stainless steel
  • 2 kW, 240 volts, 17" long, 10" hot zone
  • Never Used
  • $70.00 per heater


(2) Process Technology 2 inch Stainless Steel Screws Plug Heaters
  • Model #2T4-208-18
  • 316 stainless steel
  • 4 kW, 208 volts, 20 amps, 18" long
  • $165.00 per heater
       Process Technology 2in Stainless Steel Screw Plug Heaters
Process Technology 2in Stainless Steel Screw Plug Heaters


(1) Process Technology Indicating Combination Control with 7' Teflon Sleeve
  • Model #C302
  • 240 volts, 30 amps
  • $80.00

(2) Reliance Motors
  • Never used
  • Model Number: P32G4550A
  • 40 HP, 1775 rpm, 324T frame
  • 230/460/3/60, TEFC, 99/49.5 FLA, SF: 1.15, Ins: F
  • Drive and opposite end bearing No. 55BC03JP30X
  • $800.00 each
      Reliance Motors
Reliance Motors


Refurbished PVC Centrifugal Fan
  • Viron International
  • Model: VCB-1136
  • 22,463 CFM @ 3” wc
  • 30 HP, 480/3/60 Motor
  • New PVC housing
  • New pillow block bearings
  • New shaft seal
  • New belts


 
  • Blasted and epoxy coated steel frame
  • Motor has been bench tested
  • Solid FRP wheel
  • Ships Ex Works Rochester, NY
  • Shipping weight is approx. 1900 lbs.
  • Shipping dimensions, 80” x 80” x 82” tall.
  • $7800.00 + $600.00 domestic crating charge 
  Refurbished PVC Centrifugal Fan
Refurbished PVC Centrifugal Fan

   
  Refurbished PVC Centrifugal Fan
Refurbished PVC Centrifugal Fan
   
Refurbished PVC Centrifugal Fan
        Refurbished PVC Centrifugal Fan
Refurbished PVC Centrifugal Fan
      Refurbished PVC Centrifugal Fan
Refurbished PVC Centrifugal Fan